The power of the permit agency in the palm of your hand
Automate your oversize/overweight quotes, axle compliance and permits with oversize.io
All tires on a vehicle will have proper tread depth of at least 2/32 of an inch and be in safe operating condition.
All tires must appear to be properly inflated - even though a gauge check is not required.
Tires should be inspected visually and the tread should be measured with a tread depth gauge calibrated in 32nds of an inch if it does not have tread wear indicators.
(a) A solid rubber tire used on a vehicle must have rubber on the traction surface that extends above the edge of the flange of the periphery.
(b) A person may not operate or move a motor vehicle, trailer, or semitrailer that has a metal tire in contact with the roadway, unless:
(1) the vehicle is a farm wagon or farm trailer that has a gross weight of less than 5,000 pounds; and
(2) the owner is transporting farm products to market, for processing, or from farm to farm.
(c) A tire used on a moving vehicle may not have on its periphery a block, stud, flange, cleat, or spike or other protuberance of a material other than rubber that projects beyond the tread of the traction surface, unless the protuberance:
(1) does not injure the highway; or
(2) is a tire chain of reasonable proportion that is used as required for safety because of a condition that might cause the vehicle to skid.
(d) The Texas Transportation Commission and a local authority within its jurisdiction may issue a special permit that authorizes a person to operate a tractor or traction engine that has movable tracks with transverse corrugations on the periphery or a farm tractor or other farm machinery.
(e) A person commits an offense if the person offers for sale or sells a private passenger automobile tire that is regrooved. An offense under this section is a misdemeanor punishable by a fine of not less than $500 or more than $2,000.Calculate Oversize/Overweight Load Regulations and Prices Instantly with Oversize.io