Simplify Your Oversize/Overweight Loads
Single Trip Permit
Manufactured Homes Maximum limits:
Permits are available only to transporters or licensed manufacturers and dealers (CVC 35790(2)(e).
Annual Permits
10’ WIDE MANUFACTURED HOME
Permits are available only to transporters or licensed manufacturers and dealers (CVC 35790)(2)e). In this case, a transporter is one who is in the business of moving manufactured homes and possesses an HCD decal.
12’ WIDE MANUFACTURED HOME
Permits are available only to transporters or licensed manufacturers and dealers (CVC 35790)(2)e). In this case, a transporter is one who is in the business of moving manufactured homes and possesses an HCD decal.
Manufactured Housing maximum length/width
Maximum Width: 16'-0" including eves. No hardship program.
- Units 12'-0" wide or less require a tractor not less than 6,500 pounds.
- Units greater than 12'-0" wide require a tractor not less than 9,500 pounds.
Maximum Length: 80'-0" unit length including tongue.
Maximum Combination Vehicle Length:
- 105'-0" for a two-axle power unit.
- Unlimited for a power unit with three or more axles.
Manufactured Housing Unit permits can only be issued to licensed dealers, manufacturers, and haulers.
Cost:
Single Trip* ($16): 7 Consecutive Days Duration. A single trip permit is from a single origin to a single destination in one direction of travel.
Annual ($90): One-Year Duration. Available for certain envelope loads or specific vehicles on specified highways.
Repetitive ($90): Maximum of 90-Day Duration. Basically a single trip permit for the delivery of the same load over the same route on a repeated basis (i.e., Overwidth pipe to a project).
Source of information: https://dot.ca.gov/-/media/dot-media/programs/traffic-operations/documents/f0018192-19900223-ch02.pdf
https://dot.ca.gov/programs/traffic-operations/transportation-permits/faq
Calculate Oversize/Overweight Load Regulations and Prices Instantly with Oversize.io